Winch mounts by BadDadFab
 

https://cimg2.ibsrv.net/gimg/www.che...ffb4dbdc4.jpeg
Features;
• 1/4” steel plate construction
• Fully welded design
• Integrated Steering Box Brace
• Built In D-ring mounts
• Bolts onto your Jeep in 19 locations
• Increased approach angle
• Lower center of gravity
• Enhances handling and overall feeling of the steering
• Adaptable to a wide range of bumpers

Price is $350 plus shipping.


https://cimg7.ibsrv.net/gimg/www.che...31ac362fc.jpeg


Im proud to announce that these mounts are finally on sale! It’s been a long time coming and I appreciate everyone’s patience. If you’ve been following my “Hidden Winch Mount” thread, (https://www.cherokeeforum.com/f67/hi...-mount-232026/) you know about the development time I’ve put into these.

PM me if you’re interested, I’ll gladly answer any questions.


https://cimg8.ibsrv.net/gimg/www.che...58e6c55d3.jpeg
Reilly used Ares Fabs modular bumper ends on his installation. These will bolt right onto the stock bumper mounts and there are several styles available. https://aresfabrication.com/model/xj/bumpers-xj/


https://cimg4.ibsrv.net/gimg/www.che...0be861fab.jpeg
This install has a custom made tube bumper.

https://cimg7.ibsrv.net/gimg/www.che...266778e61.jpeg
Here’s a picture of the steering box brace. Not only does this brace the sector shaft area, but also boxes in with the side plate that the 3 steering box bolts go thru!

https://cimg3.ibsrv.net/gimg/www.che...fe3939bd1.jpeg
Here’s a better picture of how the steering box is “boxed” into place resulting in a very strong mount!

That looks nice!

I worked toward designing something like this a couple years ago but never made it to completion. Great Job.