Mark this thread as Unsold
[FS] Three 31x10.50x15 pro comp m/t on black steel wheels, 8.25 rear axle in Prescott AZ
#1
Seasoned Member
Thread Starter
Join Date: Jan 2009
Location: Prescott, AZ
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
Three 31x10.50x15 pro comp m/t on black steel wheels, 8.25 rear axle in Prescott AZ
I have three wheels with tires, 31x10.5x15 pro comp mud terrains mounted on black steel wheels, 15x8, 5 on 4.5, 4.5" back spacing. Good tread minor slicing from off roading, rims have a little rock rash, but doesn't effect performance, drive on them for 10-20k miles, or use them as spares or for rec vehicle. $75 each or all three for $175. No shipping
Two sets of stock XJ alloy wheels, same size, stock back spacing. One set has stock tires on them, 3 are good, one is flat, decent tread. $50 per set
Also have a Chrysler 8.25 rear axle, 3.07 gears, came off a 4th quarter production 96 XJ, has the newer style yoke so I assume its 29 spline. $100 or come make an offer. No shipping
Items are located in Prescott, AZ
No shipping
I'll try to post pics up later.
Dan
Two sets of stock XJ alloy wheels, same size, stock back spacing. One set has stock tires on them, 3 are good, one is flat, decent tread. $50 per set
Also have a Chrysler 8.25 rear axle, 3.07 gears, came off a 4th quarter production 96 XJ, has the newer style yoke so I assume its 29 spline. $100 or come make an offer. No shipping
Items are located in Prescott, AZ
No shipping
I'll try to post pics up later.
Dan
#4
Seasoned Member
Thread Starter
Join Date: Jan 2009
Location: Prescott, AZ
Posts: 443
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L
And I'm pretty sure it's 29 spline. Like I said, it was a 4th quarter production 96, and it has the newer style drive shaft yoke found on 29 spline axels.
Thread
Thread Starter
Forum
Replies
Last Post
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)