Rockhead

This axle is off of my 2000 Cherokee. It has the Rusty's Heavy Duty Lower Control Arm Mounts, the cam bolts in the pictures ARE NOT included. The 4.10 pinion is installed and set, the 4.10 ring gear is the one sitting on top of the carrier in the box next to the axle. A new carrier is needed because of the gear split 3.55/3.73. The ball joints are fine. There are no knuckles, unit bearings or axle shafts. If you have a dana 30 axle, this is a cheap way to get 4.10 gearing and the heavy duty lower control arm mounts.

big12xj

do you still have gears axle

Rockhead

Do you mean the spider gears? Yes, there are spider gears in the carrier that is in the box. That carrier has 3.55 gears on it, a different carrier is needed for the 4.10 ring gear that is on top in the picture. The spider gears and 4.10 ring gear will transfer to the proper carrier.
http://eastcoastgearsupply.com/i-129...r-3-73-up.html

Please PM me if your interested in the axle, I don't check this post regularly.
Thanks.

Rockhead

Just a bump. 4.10 gearing and HD lower control arm mounts worth their weight in gold.
My new axle has the stock lower mounts with welded on skids.
The pic shows what happened to those. I just ordered a new set of the Rusty's HD lower control arm mounts for my new axle (pictured).