Mark this thread as Unsold
FS[SouthEast]: hp 44
#1
CF Veteran
Thread Starter
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
hp 44
Well selling another axle... this one is kinda built
76 hp44
4.56
grizzly locker
yukon alloys
super joints
and steering
3/8 diff cover
It has the passenger side knuckle milled, drilled and tap with a high steer arm... but it is questionable if you ask me.. but is definately functionable.
If you want true High steer.. I have some gm knuckles all ready set up I will work a deal on.
Wil take pics and post them tommorow.I can also cut off anything you want off for free.. and weld on anything you want for a small fee
Price is 1500.. will trade for hp d60, d60 arb plus some cash... SOme 39/40" tires with decent tread. hydro assist parts as well
76 hp44
4.56
grizzly locker
yukon alloys
super joints
and steering
3/8 diff cover
It has the passenger side knuckle milled, drilled and tap with a high steer arm... but it is questionable if you ask me.. but is definately functionable.
If you want true High steer.. I have some gm knuckles all ready set up I will work a deal on.
Wil take pics and post them tommorow.I can also cut off anything you want off for free.. and weld on anything you want for a small fee
Price is 1500.. will trade for hp d60, d60 arb plus some cash... SOme 39/40" tires with decent tread. hydro assist parts as well
#5
CF Veteran
Thread Starter
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
DID yall read that I will weld on the needed bracket if you buy them for a small fee....
Also have a 9" that just needs gears installed to match... could be rolling on Fullwidth built stuff pretty cheap
Also have a 9" that just needs gears installed to match... could be rolling on Fullwidth built stuff pretty cheap
#6
Newbie
Join Date: Sep 2010
Location: Newport News, VA
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 HO
Hey
I'm interested in these axles...
Can you message me exactly what I would need to get these under my Cherokee I'm a noob at going to 1 tons lol
Thank you!
I'm interested in these axles...
Can you message me exactly what I would need to get these under my Cherokee I'm a noob at going to 1 tons lol
Thank you!
#7
CF Veteran
Thread Starter
Join Date: Jan 2009
Posts: 2,740
Likes: 0
Received 0 Likes
on
0 Posts
Year: 87
Model: Cherokee
Engine: 4.0
These are not one tons.. These are full width axles. To put them under your rig you will need LCA MOUNTS, shock mounts, and upper link mounts. You will also ned to modify /replace your brake lines. Also need to get a special u joint to make yourcurrent driveshaft work.
On the rear you will need some new leaf mounts, shock mounts, and 5x5. 5 rims.
that should be most of it..
On the rear you will need some new leaf mounts, shock mounts, and 5x5. 5 rims.
that should be most of it..