Built HP Dana 30 and 8.25 Set
Came out of my 99 XJ and they work and perform great. I'm upgrading to larger tires and a different build so these axles need to find a good home.
Ready to rock! Front: - HP Dana 30 with over the knuckle 1-ton steering from JCR. - Yukon 4.56 gears - Aussie locker. - Chromoly shafts and stock shafts come with it as spares. - New inner seals recently and outer seals as well. - Alloy USA ball joints. - Lower control arm mount guards welded on. - Small truss on it - G2 cover. - New calipers and brakes installed within the last year as well on front and new wheel bearings on both sides with replacements still have as spares (can never have too many spares parts for an offroad rig) - New sway bar link mounts come with it as well to be welded on -Axle mount trac bar Here is a parts list for JUST the front axle: -New Brakes and Calipers ~ $100 -Alloy USA Ball Joints $199 -Aussie Locker $259 -Chromoly Shafts $490 -Outer Tube Seals $50 -Ring and Pinion $130 -G2 Cover $119 -Control Arm Mount Skid plates $50 -1 Ton OTK steering $390 (missing other items like seals and truss, trac bar mount, etc) This alone comes to $1,417 WITHOUT any labor to install or the axle housing itself! Rear 29 Spline 8.25 - 4.56 gears - Powertrax locker - Chromoly shafts and stock shafts come as spares. - Also have Ruffstuff cover and truss (not installed) that goes with it. - New drum brakes installed this year with wheel cylinders and everything new ebrake cables, etc. Will also include front and rear driveshafts if you need them. Front is brand new, ran once for a weekend and have old front as spare with new ujoint. $1800 for the set. Located in Blacksburg VA. This is a good deal on this pair! |
https://cimg4.ibsrv.net/gimg/www.che...e3f521cda9.jpg
Front HP Dana 30 https://cimg2.ibsrv.net/gimg/www.che...d3b8a134af.jpg Rear 29 Spline 8.25 |
Thinking about it,
Finishing the body work on a 2001 build and was about to start the axles. What tires were you running on these ? Slack |
What a deal. Wish I was in better shape financially, I’d jump all over em.
|
Originally Posted by Slackdaddy
(Post 3495501)
Thinking about it,
Finishing the body work on a 2001 build and was about to start the axles. What tires were you running on these ? Slack Was running 35x12.50s and have a set of 5 for sale as well. ;) |
Originally Posted by samiam
(Post 3495606)
What a deal. Wish I was in better shape financially, I’d jump all over em.
Thanks man, yeah I think it's a super fair price for this set up. Hopefully someone will be able to put them to good use! |
PM SENT
|
Originally Posted by Ford1150
(Post 3497028)
PM SENT
Sweet. Got it and responded. :) |
All times are GMT -5. The time now is 01:57 AM. |
© 2024 MH Sub I, LLC dba Internet Brands