Mark this thread as Unsold
FS[FourCorners]: 2 d30's 1 d44 1 c8.25 27spline jeep axles
01-13-2013, 09:49 AM
#1
CF Veteran
Thread Starter
Join Date: Sep 2011
Location: vernal, utah
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
2 d30's 1 d44 1 c8.25 27spline jeep axles
i live in vernal, utah 84078 but im willing to deliver to the salt lake, provo or grand junction area's...
c8.25 27 spline with 3.07 gears from a '94 xj for
$45
i also have other stuff that i dont need, the '94 xj is being parted out down to the bare metal. my '95 doesnt need 's front driveshaft or it's rear 4.5" RE leaf springs.
Np242 with hack n tap. 100.00
Np242 without hack n tap 50.00
c8.25 27 spline with 3.07 gears from a '94 xj for
$45
i also have other stuff that i dont need, the '94 xj is being parted out down to the bare metal. my '95 doesnt need 's front driveshaft or it's rear 4.5" RE leaf springs.
Np242 with hack n tap. 100.00
Np242 without hack n tap 50.00
Last edited by fathan16; 05-05-2013 at 10:26 AM.
01-14-2013, 09:54 AM
#2
Newbie
Join Date: May 2012
Location: jersey shore
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0 6cyl
I would like to take the dana 44 and workd dana 30 but im in nj. If you can ship them to me i would still be interested if shipping isnt to much. If you can give me a price for both shipped to 08755 that would be great
01-16-2013, 06:58 PM
#5
CF Veteran
Thread Starter
Join Date: Sep 2011
Location: vernal, utah
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
the 4.88 30 and 44 are sold and the re leafs... i still have a front driveshaft. the tcase. and interior parts from a '94.
04-04-2013, 11:13 PM
#7
Junior Member
Join Date: Oct 2012
Posts: 89
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Trending Topics
05-03-2013, 09:50 PM
#9
Member
Join Date: Feb 2011
Location: Colorado Springs, Co
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1997
Model: Cherokee
Engine: 4.0 I6 HO
i live in vernal, utah 84078 but im willing to deliver to the salt lake, provo or grand junction area's...
c8.25 27 spline with 3.07 gears from a '94 xj for
$45
HP dana 30's one with 3.07 gears and open, that i have not done anything to since ive had it.
$75
HP dana 30 that is somewhat built. has new 4.88 gears with a spartan locker, ball joints, brake rotors, and wheel hub/bearings all installed in july 2012. the knuckle tie rod end holes have been drilled out for bigger tre's. ill let it go for
$150.
dana 44 from an 87 xj. has 4.88 gears with a spartan locker installed in july 2012. new drum brakes july 2012. $400
i also have other stuff that i dont need, the '94 xj is being parted out down to the bare metal. my '95 doesnt need it's front driveshaft or it's rear 4.5" RE leaf springs.
c8.25 27 spline with 3.07 gears from a '94 xj for
$45
HP dana 30's one with 3.07 gears and open, that i have not done anything to since ive had it.
$75
HP dana 30 that is somewhat built. has new 4.88 gears with a spartan locker, ball joints, brake rotors, and wheel hub/bearings all installed in july 2012. the knuckle tie rod end holes have been drilled out for bigger tre's. ill let it go for
$150.
dana 44 from an 87 xj. has 4.88 gears with a spartan locker installed in july 2012. new drum brakes july 2012. $400
i also have other stuff that i dont need, the '94 xj is being parted out down to the bare metal. my '95 doesnt need it's front driveshaft or it's rear 4.5" RE leaf springs.
05-05-2013, 10:23 AM
#10
CF Veteran
Thread Starter
Join Date: Sep 2011
Location: vernal, utah
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
I would do thirty on the driveshaft. The spartan along with all the axles and leafs are gone. Still have an np242 with out a hack n tap with the old tail housing and i have another older one with an iro hack n tap installed.
Thread
Thread Starter
Forum
Replies
Last Post
MACherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
08-20-2015 01:57 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)