Mark this thread as Unsold
FS[NorAtl]: Built 94 Cherokee for sale
#1
Junior Member
Thread Starter
Join Date: Jan 2017
Posts: 39
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Built 94 Cherokee for sale
4800$ located in Dover,DE
1994 Jeep Cherokee
All aftermarket parts have around 5k miles on them
Front suspension
-Dana 30 tubes welded and sleeved, c’s gusseted and lower mounts skid plated.
-4.88 gears
-Yukon lifetime warranty chromoly axles
-Cavfab 3 link longarm
-Fox shocks
-Rubicon express 4.5” coils
-JKS sway bar disconnects
-extended stainless break lines
-rotors, calipers and pads and ball joints are all fairly new
Rear suspension
Chrysler 8.25
-4.88’s
-Spartan locker
-Yukon 29 spline axles
-OME 4.5” leaf springs with a leaf removed, I still have the extra leaf
-Liquid iron slider boxes
-Fox shocks
-DPG adjustable bump stop plates
-extended stainless line
-all brakes are fairly new
Steering
-CavFab heavy duty crossover steering.
Tires and wheels
-5 35x12.50x17 Nitto TrailGrapplers like new
4 are on Mamba MR1x wheels and spare is on normal jk 5 spoke
Transfer case
-clocked upwards
-SYE
-Boost werks t-case linkage
-stock front driveshaft in rear, so both driveshafts are the same.
Motor
-new radiator
-flowkooler water pump
-neck tapped for manual temp gauge
-mechanical fan replaced with 14 inch electric fan and temperature controller
Body
-No rust
-front tow hooks
-trailer hitch
-front fenders cut for clearance
-Rear quarters cut for clearance and new inners made and welded in
Interior is clean and has mechanical water temp and oil pressure gauges installed in panel.
The bads
Transfer case will need a chain eventually, it makes noise at low speeds
Motor taps when cold but is dead silent once warmed up
Their might be some things I’m missing but that is the majority of work done to the Jeep, it is reliable and I drive it at least once a week.
1994 Jeep Cherokee
All aftermarket parts have around 5k miles on them
Front suspension
-Dana 30 tubes welded and sleeved, c’s gusseted and lower mounts skid plated.
-4.88 gears
-Yukon lifetime warranty chromoly axles
-Cavfab 3 link longarm
-Fox shocks
-Rubicon express 4.5” coils
-JKS sway bar disconnects
-extended stainless break lines
-rotors, calipers and pads and ball joints are all fairly new
Rear suspension
Chrysler 8.25
-4.88’s
-Spartan locker
-Yukon 29 spline axles
-OME 4.5” leaf springs with a leaf removed, I still have the extra leaf
-Liquid iron slider boxes
-Fox shocks
-DPG adjustable bump stop plates
-extended stainless line
-all brakes are fairly new
Steering
-CavFab heavy duty crossover steering.
Tires and wheels
-5 35x12.50x17 Nitto TrailGrapplers like new
4 are on Mamba MR1x wheels and spare is on normal jk 5 spoke
Transfer case
-clocked upwards
-SYE
-Boost werks t-case linkage
-stock front driveshaft in rear, so both driveshafts are the same.
Motor
-new radiator
-flowkooler water pump
-neck tapped for manual temp gauge
-mechanical fan replaced with 14 inch electric fan and temperature controller
Body
-No rust
-front tow hooks
-trailer hitch
-front fenders cut for clearance
-Rear quarters cut for clearance and new inners made and welded in
Interior is clean and has mechanical water temp and oil pressure gauges installed in panel.
The bads
Transfer case will need a chain eventually, it makes noise at low speeds
Motor taps when cold but is dead silent once warmed up
Their might be some things I’m missing but that is the majority of work done to the Jeep, it is reliable and I drive it at least once a week.
Thread
Thread Starter
Forum
Replies
Last Post
Empty_Pockets
Axles/Tires/Wheels
5
09-27-2017 06:48 PM
TRNDRVR
For sale
7
01-21-2009 06:21 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)