Mark this thread as Unsold
FS[GreatLakes]: Used RC 6.5 long arm lift for an XJ
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Location: Northwestern PA
Posts: 74
Likes: 0
Received 5 Likes
on
2 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.7
Used RC 6.5 long arm lift for an XJ
I removed this lift from 98xj with a 5 speed and 231 t case I got for parts. Comes with a new mounting hardware kit, new spring and shackle bushing
s. Used JKS bar pin eliminators for the front shocks and rear upper shock mounts. Control arm bushings are in good shape, no play and take grease. The transfer case skid is homemade from 1/4" and 3/8" angle and plate. Some of the plastic coating has come off the brake line's. No sway bar disconnects. $650.00 OBO Located in Bradford PA 16701
s. Used JKS bar pin eliminators for the front shocks and rear upper shock mounts. Control arm bushings are in good shape, no play and take grease. The transfer case skid is homemade from 1/4" and 3/8" angle and plate. Some of the plastic coating has come off the brake line's. No sway bar disconnects. $650.00 OBO Located in Bradford PA 16701
#2
Interested
[QUOTE=nowhereman98;3442109]I removed this lift from 98xj with a 5 speed and 231 t case I got for parts. Comes with a new mounting hardware kit, new spring and shackle bushing
s. Used JKS bar pin eliminators for the front shocks and rear upper shock mounts. Control arm bushings are in good shape, no play and take grease. The transfer case skid is homemade from 1/4"
s. Used JKS bar pin eliminators for the front shocks and rear upper shock mounts. Control arm bushings are in good shape, no play and take grease. The transfer case skid is homemade from 1/4"