Rubicon Express Track Bar
 

RE1660
The track bar is in good condition, the joint is still tight and the bushing is still in good shape. I only removed it to go over the axle. The bushing and flex joint on it are only about a year old, and it comes with a brand new flex joint and a used one that could be rebuilt. Located in Upstate, SC and I'm looking for $100 or trade for Cherokee/Comanche parts.Attachment 404015Attachment 404014Attachment 404013

Trades
 

What comanche/cherokee parts are you looking for? I have been working on a 97 swap comanche so i have a few parts laying around i dont really need.

I'm really looking for a set of tail lights for it. I'd love to have a 3 spoke steering wheel, a good condition factory radio, good mirrors, 10 slot grill, intermittent wiper module and multifunction switch, fog light panel for a Comanche. There are a lot of little parts I'd like to collect

I have a pretty wore down blue 3 spoke wheel, ill add a picture of the interior used to look like. I have a set of mirrors from what i can remember are all good aside from just being faded. Ill have to look at the harness i pulled out to see if i have that wiper module on it, but im not sure if it did being that the wipers would only do one speed.
https://cimg1.ibsrv.net/gimg/www.che...c05d864f05.jpg
The tail lights id like to keep for now becuase they have the chrome trim. Most of the other stuff i dont have it came with a 97+ grill when i bought it and no radio. I do have a quartz clock for it, not sure if it works or not. The truck was kind of a basket case and it barley ran.

Dang, looking for black and it actually does have intermittent wipers and cruise control. The module under the steering wheel might be bad or have a bad connection. I'm looking for intermittent with no cruise. The mirrors have a bad tendency to break at the plastic bracket and then the just vibrate the whole time driving and you can't use them. Those tail lights would go good with the chrome front end I just got for it Attachment 404031

Yea i plan on restoring them, they have some little scuffs and cracks plus primer from the idiot previous owner, but with a little epoxy, very fine sand paper and clear coat i think they would look great. They go for a good buck in good shape on ebay.
https://cimg6.ibsrv.net/gimg/www.che...880254857b.jpg
https://cimg8.ibsrv.net/gimg/www.che...7b4bfe597a.jpg
I might consider trading them for your track bar and the lights from your truck unless they are all smashed up, but i understand mine are not very great looking right now.

Sold