Mark this thread as Unsold
FS[PacNorWest]: Custom Sway Bar Disconnects!
#1
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Custom Sway Bar Disconnects!
I've made up some Sway-Bar Quick Disconnects, and i'm going to be selling them.
They're all 1/2". Heim joints and threaded rod is 1/2"-20, and the rest of the bolts are 1/2"-13 Stainless Steel. Heims are rated for up to 9,100 pounds each. Bracket that bolts to the swaybar is 1/4" plate. It's bent in a break and not welded.
Heim joints are greaseable! They will last longer!
They are fully adjustable (via the threaded rod) and have about an inch of adjustment in them when i ship them. I've made them specifically for my jeep with 4.5" of lift.
If you have less lift, and own a hacksaw, you can cut the rod yourself to make sure it fits perfect. (lifts sag, lifts aren't always the same, etc etc, i don't want to cut the rod too short on you.)
If you want grade 8 bolts, say that, and i will make them custom for you and mark up the price accordingly. (i haven't priced them out for grade 8 bolts yet, but i will if someone wants them.)
Price - $90 shipped. (anywhere in the USA.) Will ship out of the USA but shipping is going to be more.
Shipping - USPS Priority Mail Flat Rate Envelope. It will get to your house within 3 days of me shipping it, and you will get a tracking number.
Payment - Paypal.
I currently have 3 made up and ready to ship, but if people are interested i will make more up! Obviously a pair consists of two of everything. (one for each side.)
What you see in these pictures is exactly what you will receive.
In the pictures it looks like the connects are cockeyed but that is simply the angle of the picture. I assure you they are standing up straight and vertical.
They're all 1/2". Heim joints and threaded rod is 1/2"-20, and the rest of the bolts are 1/2"-13 Stainless Steel. Heims are rated for up to 9,100 pounds each. Bracket that bolts to the swaybar is 1/4" plate. It's bent in a break and not welded.
Heim joints are greaseable! They will last longer!
They are fully adjustable (via the threaded rod) and have about an inch of adjustment in them when i ship them. I've made them specifically for my jeep with 4.5" of lift.
If you have less lift, and own a hacksaw, you can cut the rod yourself to make sure it fits perfect. (lifts sag, lifts aren't always the same, etc etc, i don't want to cut the rod too short on you.)
If you want grade 8 bolts, say that, and i will make them custom for you and mark up the price accordingly. (i haven't priced them out for grade 8 bolts yet, but i will if someone wants them.)
Price - $90 shipped. (anywhere in the USA.) Will ship out of the USA but shipping is going to be more.
Shipping - USPS Priority Mail Flat Rate Envelope. It will get to your house within 3 days of me shipping it, and you will get a tracking number.
Payment - Paypal.
I currently have 3 made up and ready to ship, but if people are interested i will make more up! Obviously a pair consists of two of everything. (one for each side.)
What you see in these pictures is exactly what you will receive.
In the pictures it looks like the connects are cockeyed but that is simply the angle of the picture. I assure you they are standing up straight and vertical.
Last edited by HudsonN; 04-21-2013 at 04:47 PM.
#4
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Sure can! Just scroll back up and look at the pictures again. The last one includes how to take a measurement that i need to cut the rod the correct length. Just give me that measurement and you're good to go!
Trending Topics
#9
CF Veteran
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Ill order a set asap for sure right now Im running the rear swaybar only handles pretty good but with the correct swaybar links it should handle like a dream
#11
CF Veteran
Join Date: Dec 2012
Location: York, PA
Posts: 4,169
Likes: 0
Received 6 Likes
on
6 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Awesome man. If my shop tells me the sway is required for inspection, I'll be hitting you up. P.S., did you ever get your linkage straightened out? Not to jack thread...just PM me
#13
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
#14
Seasoned Member
Thread Starter
Join Date: Jul 2012
Location: New Milford, CT
Posts: 484
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1999
Model: Cherokee
Engine: 4.0
Just posted them up on eBay in case you're weary from buying off me on here or something along those lines. I had to tack the price up $10 on there though as eBay likes to reach deep into my pockets.
http://www.ebay.com/itm/230995785353?item=230995785353&viewitem=&vxp=mtr
http://www.ebay.com/itm/230995785353?item=230995785353&viewitem=&vxp=mtr
#15
CF Veteran
Join Date: May 2012
Location: Wilmington,NC
Posts: 3,004
Likes: 0
Received 1 Like
on
1 Post
Year: 1989
Model: Cherokee
Engine: 4.0
Just posted them up on eBay in case you're weary from buying off me on here or something along those lines. I had to tack the price up $10 on there though as eBay likes to reach deep into my pockets.
Video Link: http://www.ebay.com/itm/230995785353?item=230995785353&viewitem=&vxp=mtr
Video Link: http://www.ebay.com/itm/230995785353?item=230995785353&viewitem=&vxp=mtr