4.5in rubicon express lift
For sale I have a 4.5 inch rubicon express lift. I have the coils for the front and two complete leaf packs for a bastard pack. This has hardly been used! I'm asking 350 obo. You pay shipping or pick it up! Feel free to ask questions and make offers!
|
If you decide to break the kit up I'd like to have the leafs.
|
Why would you need to make a bastard pack if they are full packs?
|
Ahhh just saw that. Is it a full leaf pack or basterd pack?
Im game if its the Rubicon express 4.5" springs. |
Originally Posted by Justjoshnya
(Post 3015685)
Ahhh just saw that. Is it a full leaf pack or basterd pack? Im game if its the Rubicon express 4.5" springs.
|
Originally Posted by davidduffee
(Post 3015942)
they are out of an s10. It's super easy to make a bastard pack out of them. Sorry for if that's unclear. What you do is take the leaf pack and cut the eyes off and take a few packs from your current heap and put them on there and hook it back up. It's fairly easy. Bleeping jeep has a video for it on YouTube. But the packs were expensive themselves and there's no rust. Haven't used either
|
Where you located
|
I'll buy the whole kit... What's all included?
|
Originally Posted by JPXJMOAB
(Post 3016400)
I'll buy the whole kit... What's all included?
|
Where are u located
|
Originally Posted by sawyerhester
(Post 3016447)
Where are u located
|
Originally Posted by davidduffee
(Post 3016443)
The packs and the coils. You won't need brake lines or arms. You may or may not need shocks depending in the ones you have currently. The only thing you will need for sure are new ubolts for the rear
|
Originally Posted by BNJeepsta
(Post 3016462)
Please don't spread false information. At 4.5" of lift you NEED longer brake lines and you need, at least, lower control arms.
|
Originally Posted by davidduffee
(Post 3016474)
with the research I did I wasn't going to need those.. But I'll trust you and apologize you may need lines and arms depending on your current jeep in my opinion. I had a 3in and wasn't going to need anything else. I apologize
|
250 plus shipping anyone?
|
Not to knock you man but that's a bit steep I just picked up the same springs with uppers and lower arms(in need of bushings) for quite a bit less, might consider another drop
|
Originally Posted by tricitiesxs
(Post 3024332)
Not to knock you man but that's a bit steep I just picked up the same springs with uppers and lower arms(in need of bushings) for quite a bit less, might consider another drop
|
Alright alright. 170 plus shipping. I need a tranny lol lemme know if there are any takers
|
I have a tranny for sale. ......
|
Originally Posted by Justjoshnya
(Post 3026523)
I have a tranny for sale. ......
|
Ware ya located? I have a few
|
Originally Posted by Justjoshnya
(Post 3027254)
Ware ya located? I have a few
|
Not sure about shipping and all but im in southern Arkansas.
|
Originally Posted by Justjoshnya
(Post 3027880)
Not sure about shipping and all but im in southern Arkansas.
|
With kickdown or with out?
700r or early 4l60e |
Originally Posted by Justjoshnya
(Post 3028209)
With kickdown or with out? 700r or early 4l60e
|
Just making sure you weren't in need of the 4l60e some people do mistake them.
|
Originally Posted by Justjoshnya
(Post 3028225)
Just making sure you weren't in need of the 4l60e some people do mistake them.
|
Originally Posted by davidduffee
(Post 3028219)
without. I just bought one haha. And I'm pretty sure the 700r. It's for an 88 k5 blazer 350sb
|
I have one that was rebuilt before the motor started going. Probably has 5-10k on it. Its in a 87 k5. Ill take 400.00 for it.
|
Originally Posted by Justjoshnya
(Post 3028288)
I have one that was rebuilt before the motor started going. Probably has 5-10k on it. Its in a 87 k5. Ill take 400.00 for it.
|
Sure is. Surely there is one closer to ya
|
How much shipping just for the coils to 29671
|
Originally Posted by sawyerhester
(Post 3033602)
How much shipping just for the coils to 29671
|
All times are GMT -5. The time now is 11:30 AM. |
© 2024 MH Sub I, LLC dba Internet Brands