XJ rear end sag?
Hey guys just bought this 91 XJ I think the guy said it came with a four and a half inch lift from rough country trying to figure out the rear end sag anybody help me out here? Thanks you in advance!
Measurements - Center of tire to bottom of fender Passenger side Rear tire 21 and 1/8 Front tire 23 and 3/4 Driver side Rear tire 21 and 1/16 Front tire 23 and 5/16 Pictures - https://cimg1.ibsrv.net/gimg/www.che...1767022fc9.jpg Driver side https://cimg8.ibsrv.net/gimg/www.che...42d42249e6.jpg Driver side front https://cimg4.ibsrv.net/gimg/www.che...c33f208738.jpg Driver side rear https://cimg7.ibsrv.net/gimg/www.che...d79778585c.jpg Passenger side |
Either the wrong rear springs or the lift was an AAL and the rear has just gone flat.
|
Could be flat leaf springs as said above.
hopefully it's not a block or shackle lift paired with flat leaves. |
Originally Posted by TrailerTrash
(Post 3690492)
Could be flat leaf springs as said above.
hopefully it's not a block or shackle lift paired with flat leaves. these are the best photos I have rn of them. Will take better ones when I'm off work https://cimg6.ibsrv.net/gimg/www.che...e68e1fcb82.jpg https://cimg9.ibsrv.net/gimg/www.che...7acff34ff5.jpg |
https://cimg7.ibsrv.net/gimg/www.che...3863a89c7f.jpg
Here is a pic of a new 5.5" leaf spring to compare with. I can assume your lift has seen better days. |
Originally Posted by danej1026
(Post 3690516)
https://cimg7.ibsrv.net/gimg/www.che...3863a89c7f.jpg
Here is a pic of a new 5.5" leaf spring to compare with. I can assume your lift has seen better days. |
Originally Posted by Dbellis666
(Post 3690557)
Trying to get mine like that ☺️ did you extend the brake line? If so what did you end up using? Was thinking of just adding a block 🤢 until I end up buying new springs
|
Don't do the blocks, just wait until you can replace the springs with new
|
**** UPDATE ****
Found the problem child it is indeed the leaf springs. Went over some speed bumps you know going faster than I shouldn't have and I found that the rear springs are now negative cambered. Will be replacing them when I can afford it. Thank you everybody for you guys a suggestions |
All times are GMT -5. The time now is 10:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands