ATNC325

I'm interested to know if anyone has found a similar retainer plate with the built in spacer for an XJ for the ZJ disc conversion??

TJ p/n 5083678AA
http://www.quadratec.com/products/52427_0001.htm

I know I can have someone make the spacer like MADXJ shows, but it sure would be nice to have the spacer built into the retainer plate like the one above.



FYI in case someone is wondering....the TJ D44 has a different axle housing bolt pattern than the XJ D44.....ask me how I know

hankthetank

i think you are s.o.l. teraflex makes a spacer for d44 conversions.

look here.

Big David

You can go to the dealer or JY & get them for a Rubicon TJ 44.

I think you've seen this but here you go.
http://www.pirate4x4.com/tech/billav...kes/index.html

And
http://www.quadratec.com/products/91...FSIV7Aod4HUAig

salad

Is this the same JY with unicorns and leprechauns?

94XjSport94

My JY has 4 (3 TJ's 1 LJ) rubicons with the axles and t cases still there. Two compressors too

salad

WTF

A pair of Rubicon D44s sells for $1000 here.

94XjSport94

Lol I was kidding... I wish!

ATNC325

The TJ axle houses have a different bolt pattern at the flange than the XJ.

Big David

Good to know.

Sean883

Get the rubicon retainers and drill them to the XJ pattern.

Big David

or just get these
http://www.quadratec.com/products/91...FSIV7Aod4HUAig

Eliminator91

With all due respect that retaining plate is not going to work, that is for a rear drum configuration. The spacer that teraflex sells is to compensate for the additional thickness caused by the disk caliper mounting plate, that sits between the axle and the backing plate. you can use that plate plus the teraflex spacer but not as a substitute.