will this rub?..33x12.50 on a 7" wide rim with 3.750" backspacing
03-18-2011, 08:05 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2010
Location: North of boston
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0 I6
will this rub?..33x12.50 on a 7" wide rim with 3.750" backspacing
will this rub?..33x12.50 on a 7" wide rim with 3.750" backspacing
Im not asking about the fenders of body, i have a 4" lift and doing alot of cutting, but is it going to rub on the back side of the wheel control arm etc
Im not asking about the fenders of body, i have a 4" lift and doing alot of cutting, but is it going to rub on the back side of the wheel control arm etc
Last edited by Mrmatt2009; 03-18-2011 at 10:25 AM.
03-18-2011, 09:52 AM
#3
CF Veteran
Join Date: Sep 2009
Location: Chesapeake, Virginia
Posts: 1,092
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2002
Model: Grand Cherokee
Engine: 4.7
yeah we need to know what you got going on to tell you if it will rub, if you have anything over a 4.5 it will not rub without trimming, anything at 4.5 or lower you'll have to trim most likely, but still we gotta know what you want to know what it will rub on and all that
Thread
Thread Starter
Forum
Replies
Last Post
her89
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
09-26-2015 12:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)