Who makes a 7 bolt bumper bracket?
 

So the PO made the winch bumper thats on my jeep now. I like it, and am in the process of removing the peeling paint and coat it in bedliner. But it only bolts on with the first 3 bolts!!! Theres no way I'm mounting a winch on there with its current setup. So what I'm looking for is someone who makes a bracket that will use 7 bolts to bolt on this bumper. I'm sure someone here knows.

for a 7 bolt you are going to have to make your own. I made mine in about an hour out of 1/4"


these are all 6 bolt

http://www.liquidironindustries.com/...cat=350&page=1

http://www.ajsoffroadarmor.com/produ...cat=256&page=1

http://roxolidtrailarmor.com/Off-Roa...g-Brackets.php

Awesome! Thanks alot!

Look UP ground pounder fab on ebay.. send him a message.. he makes them as well... he just doesnt list them. YOu can pick the thickness of your material as well.

He did my center section in 3/8's and the out side (7hole ones) in 1/4

TnT is another option

http://www.jeepinoutfitters.com/scri...idproduct=1444

Sent from my iPhone using CherokeeFM

Isn't there a picture floating around somewhere with all the measurements of the holes so you could make your own. Does anyone have a link to that?

jrc sells 7 bolt brackets
http://www.jcroffroad.com/Merchant2/...ry_Code=XJMISC

:thumbsup: