What axles are these?
#2
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
The front looks like HP D30
I can not tell if the rear is a D35 or 8.25 from the angle
also are you sure they are locked I dont see any air fittings on the housings it looks like they have arb diff covers and thats it
#4
CF Veteran
Join Date: Nov 2011
Location: SLC, Utah
Posts: 3,603
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
Pull the diff covers if you see a this carrier inside with copper tube you have an airlocker
There should be a barb on the axle for a small airline to goto in addition to the vent tube
There should be a barb on the axle for a small airline to goto in addition to the vent tube
#6
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
The car is in Poland, and I am in Norway.
I called them now and was a bit pissed. They say its 30% constant lock. But what the hell does that mean? And I was promised ARB air-locks. Now I am seriously angry.
I asked them to remember to install the compressor and the electronics when I bought it, and they said. Yes ,yes! Frikkin, frakk!!
I called them now and was a bit pissed. They say its 30% constant lock. But what the hell does that mean? And I was promised ARB air-locks. Now I am seriously angry.
I asked them to remember to install the compressor and the electronics when I bought it, and they said. Yes ,yes! Frikkin, frakk!!
Trending Topics
#8
Former Sponsor
Join Date: May 2010
Location: meriden Ct
Posts: 2,181
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
It also looks like there is an insert in the knuckle. Might want to find out if they were running a flipped tie rod or something.
#9
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
I have told them to pull the lids and give me photos of the inside.
I found out from the picture it was a standard Dana 35 = 350 on the casting
Suddenly they say its a 30% LSD inside and not airlockers, and, and, and full of excuses.
I have not paid them for the car yet, so they BETTER make it right!!
He is obviously not accustomed to customers who knows (somewhat) what they are talking about.
I found out from the picture it was a standard Dana 35 = 350 on the casting
Suddenly they say its a 30% LSD inside and not airlockers, and, and, and full of excuses.
I have not paid them for the car yet, so they BETTER make it right!!
He is obviously not accustomed to customers who knows (somewhat) what they are talking about.
#12
Newbie
Thread Starter
Join Date: Jun 2013
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Update :
No ARB lockers in these axles. Just a normal LSD in the back nothing in the front.
We came to an agreement that I get my gearing (4.56) pinion & ring installed, I keep the cast iron covers for free and the LSD for free.
I ordered Motive pinion and ring with full install kit for them and they put it in for me. I am going MAX 33x10.50 on this XJ so the gearing should be good for both the 31" thats on now and upcoming 33"
No ARB lockers in these axles. Just a normal LSD in the back nothing in the front.
We came to an agreement that I get my gearing (4.56) pinion & ring installed, I keep the cast iron covers for free and the LSD for free.
I ordered Motive pinion and ring with full install kit for them and they put it in for me. I am going MAX 33x10.50 on this XJ so the gearing should be good for both the 31" thats on now and upcoming 33"
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)