Warn hub lock nut trick
https://cimg8.ibsrv.net/gimg/www.che...c000e5ff4.jpegSo I’ve got the Warn hub kit on my dana 30. Love it but every time I check the bearings the lock nut is finger lose! Looked a little closer at it today and realized the grooves line up when tightened so I could get a 1/16” cotter pin in there! https://cimg9.ibsrv.net/gimg/www.che...46a4c807d.jpegJust trimmed the length then put the hub on to check clearance and it works! No more loose hub nuts 🤞 |
I have done similar, in that I drilled thru the outer lock nut, threaded it, and put set screw in, so that once they were tight, I just tightened the setscrew to lock them together.
|
Originally Posted by TRCM
(Post 3496841)
I have done similar, in that I drilled thru the outer lock nut, threaded it, and put set screw in, so that once they were tight, I just tightened the setscrew to lock them together.
|
Just make sure you use the finest thread setscrew you can find so you have as many threads as possible in the outer lock nut.
|
All times are GMT -5. The time now is 07:27 PM. |
© 2024 MH Sub I, LLC dba Internet Brands