want to change out dash cluster
01-17-2012, 06:59 AM
#1
Junior Member
Thread Starter
Join Date: Jul 2011
Location: slatyfork,wv
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
want to change out dash cluster
i have the dash cluster that has the light for oil,temp,batt.and oversized gas gauge would like to change to the oem with rpm and cluster that can tell me real water temp and oil pressure and rpms a lot of you have done it but i can't find thread on it
01-17-2012, 08:43 AM
#2
CF Veteran
Join Date: Feb 2010
Location: Oroville, CA
Posts: 12,367
Likes: 0
Received 19 Likes
on
18 Posts
Year: 1995
Model: Grand Cherokee
Engine: 4.0 with all of the noise and clatter
A 91 -96 cluster will work, but you need to change the oil pressure sending unit and the temp sender unit to ones for a gauge. It's an easy swap, just four screws that secure the bezel, six screws that secure the cluster, two plugs on the cluster, and the sending units.
Thread
Thread Starter
Forum
Replies
Last Post
stimp774
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
20
04-16-2017 03:46 PM
Tcq192
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
7
10-23-2015 09:25 AM
Soilman
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-06-2015 07:51 AM
sikkev
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
0
09-05-2015 11:33 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)