Trying to figure out what all has been done.
#1
Newbie
Thread Starter
Join Date: Apr 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Trying to figure out what all has been done.
Recently bought a 95 XJ, It has what I am assuming to be a 3" lift due to 3" blocks in the back(plan to get rid of the blocks soon). I got the jeep of my brother and he doesn't know what all the previous owner did. So I took some pictures and thought I would get opinions on what has been done.
No spacers on the coils rancho shocks. Could all be stock but I don't know what stock looks like to compare. Included drive shaft not sure if anything has been done there.
No spacers on the coils rancho shocks. Could all be stock but I don't know what stock looks like to compare. Included drive shaft not sure if anything has been done there.
#2
Senior Member
everything is looking very stock from here. Sounds like PO went the cheapest route possible to lift. Good news is its pretty much a clean slate.
#3
Newbie
Thread Starter
Join Date: Apr 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Ok so if I build an s10 bastard pack to get rid of the blocks and everything is seems normal/ok now. Should I be good for a bit while I save money for other upgrades?
#4
Senior Member
doesn't sound like a bad idea. After that I would say a good adjustable trackbar to center that front axle and as with any used car change all your fluids and give it a good once over. Maintenance 1st
#5
Newbie
Thread Starter
Join Date: Apr 2017
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Bought off my brother. He took it to his mechanic and they replaced water pump, looks like ps pump, new header, k&n intake. Im waiting on the full list. Was supposedly prepped for move across country and daily driver. He lost interest when mechanic found rusty floor. Im not scared of that. Spent days reading forum and learning all I can.
Day I got it.
Driverside floor, patched temporarily.
Day I got it.
Driverside floor, patched temporarily.