Transfer Case Question
03-09-2011, 03:23 PM
#1
"CF Moderator"
Thread Starter
Join Date: Sep 2008
Location: N.J. Shore Area
Posts: 3,045
Likes: 0
Received 2 Likes
on
2 Posts
Year: 1994
Model: Cherokee
Engine: l6 HO
Transfer Case Question
My friend has a 1994 XJ with a 4.0 auto and a NP 231 TC and needs to get a new one. I found him a NP242 out of a 96 with a 4.0 auto so the question is will it work with the splines? and is it a direct bolt in. Thx...Tj
03-10-2011, 12:13 PM
#3
CF Veteran
Join Date: May 2008
Location: Bristol,Pa
Posts: 5,188
Likes: 0
Received 6 Likes
on
6 Posts
Year: 94
Model: Cherokee
Engine: 4.0L
It'll bolt up.
As we discussed on phone, see if you can grab the 96's rear shaft as it may be a later 95 with the longer output.
See if the guy has the shifter and bezel as well.
As we discussed on phone, see if you can grab the 96's rear shaft as it may be a later 95 with the longer output.
See if the guy has the shifter and bezel as well.
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)