Transfer case leak
#1
Newbie
Thread Starter
Join Date: May 2010
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L High Output
Transfer case leak
I did a good amount of work on my 96 Jeep Cherokee recently, including installing a Slip Yoke Eliminator. After installing it, it sat around for a while and just in the past month I started to drive it around. I noticed that I had quite a large leak originally coming from the speedo gear. After further investigation, I noticed that the problem was the O-Ring was split around the speedo gear; replaced that. Now I still have a leak, after switching out the O-Ring with a new one. Figuring it may not be the right O-Ring, I got another one and it still seems to be leaking. It only leaks after I drive it around for a while. If it is sitting still it doesn't leak a drop.
It really seems to be coming from the Speedo Gear housing but I cannot for the life of me figure out what is causing it. Any ideas would be really appreciated.
It really seems to be coming from the Speedo Gear housing but I cannot for the life of me figure out what is causing it. Any ideas would be really appreciated.
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
codykrr
Modified XJ Cherokee Tech
9
09-18-2015 01:27 PM
Shire_Man
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
8
09-15-2015 02:29 AM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)