Transfer Case Gearing
#1
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Yuma
Posts: 420
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0, APN header & 2.5" exhaust
Transfer Case Gearing
So I'm kind of curious, who on this forum runs a lower ratio, or maybe a box4rocks setup. What did you use and why? I haven't heard many good things about the Teralow 4:1 kit. The 241OR out of the Rubicon is nice, but most used ones are going for 1500+. I'm looking to possibly build a doubler with a 231/300 so I can get lower than 2.72:1. 4.56 on 35s in the rocks with an ax-15 is a lot of clutch work.
#3
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Yuma
Posts: 420
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0, APN header & 2.5" exhaust
Well for another 100, I can run the 300 behind the 231 in the box4rocks doubler, which would give me options of 1:1, 2.63:1, 2.72:1 and 7.15:1.
#5
Seasoned Member
Thread Starter
Join Date: Apr 2011
Location: Yuma
Posts: 420
Likes: 0
Received 1 Like
on
1 Post
Year: 1993
Model: Cherokee
Engine: 4.0, APN header & 2.5" exhaust
I figured I'd ask around. I heard of having fitment issues & I probably wouldn't mind beating the floor to make it got with a doubler. I've also heard the drive shaft doesn't clear the cross member. I'm just really not sure how much I want to spend yet.
Thread
Thread Starter
Forum
Replies
Last Post
eepjeep
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
04-06-2020 03:19 PM
Blackxj51
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
22
09-13-2015 06:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)