track bar relocate
 

i have 4-4'5 inches of lift and don't notice physically the axle shift but i do have lots of tire wear and it pulls to left a bit when i brake. i have a brand new oem bar that was given to me should the 3/4' relocate solve this?

It will help. I'm at 4-4.5" and I redrilled mine. Working out so far

Three quarters of a foot?! Just kidding, it will help ALOT just make sure you use a 10mm drill bit otherwise you will have issues later with an egged out mounting hole.

relocating it will sure help out a lot just as the others are saying. on the tire wear issue, i would have the alignment checked and corrected as needed. on the brake issue, that is more than likely a caliper that is locked up on the right side or just uneven pressure in the front calipers.