Track Bar Mounting Bracket
#1
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Northern Michigan
Posts: 365
Likes: 0
Received 1 Like
on
1 Post
Year: 2000 XJ
Model: Cherokee
Engine: 4.8L Stroker
Track Bar Mounting Bracket
I am in the assembly phase of my lift project and I have noticed that the hole for the bolt on the passenger side of the track bar mounting bracket is a little bit oblong. I had some minor death wobble on this vehicle before this project began and I have uncovered numerous candidates that could have been contributing factors. I was curious if this was a big concern or if anyone had any genius fixes for such a thing. Thanks.
#4
new bracket.
upgrade to a trackbar that uses larger bolts.
weld a thick washer, or some plate steel with the right size hole to the outside of the bracket (wont help you much if the inner hole is oblong too)
upgrade to a trackbar that uses larger bolts.
weld a thick washer, or some plate steel with the right size hole to the outside of the bracket (wont help you much if the inner hole is oblong too)
#5
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Northern Michigan
Posts: 365
Likes: 0
Received 1 Like
on
1 Post
Year: 2000 XJ
Model: Cherokee
Engine: 4.8L Stroker
I don't have pics right now because I am at work. More or less, that was what I came up with. Weld a piece of steel with a new hole in it, or upgrade bolt sizes. Thanks. I will see what I can work out.
Thread
Thread Starter
Forum
Replies
Last Post
southfloridajeeps
Modified XJ Cherokee Tech
32
03-04-2023 01:10 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)