Tire Question
 

I plan on doing a 6.5 lift on my 01’ xj, what size tire could I run without cutting the fenders? And what’s the biggest I could run on the stock axles

Ive not found Lifting to gain much tire clearance.
seems 33s will rub the same from 2-6" of lift.
I run 35s with 4-5" of lift my lift height is kinda unknown to me.
the tires are bump stopping on my front fenders and ive removed a **** ton of fender. Like 6 8" of fender
Im sure 40s would bump stop but id lose alittle compression travel

you can adjust the springs too

35s and if you have the Chrysler 8.25 rear it will be fine, for the front I would swap a high pinion Dana 30 in, you should also regear the axles to 4.56.