Sethers775

Hey guys I wanted to ask for a picture of an xj with 31x12.5 tires on a 4.5 in lift. That's what I am shooting for, any suggestions help. http://jeephorizons.com/tech/xjtirefit.html Is what I am going off of.

timamybrown

Go to the Cherokee chat. There is a sticky for lift and tire setup at the top of the page.

bender32

31x10.5.......4.5 lift

JPXJMOAB

Just go with 32 1150.

bender32

A 32 will be fine for the street but my tires rub my fenders at full flex but I am running Moab wheels too

aka"dude"

Just kidding. But they are going to look small IMO

JPXJMOAB

well a 31 1250 will be worse than a 32

bender32

Yeah!!!! I'm running 31 10.5 and I had it off road after the lift and I had quite a bit of rubbing!

JPXJMOAB

well he will figure it out I guess! Stick to standard sized tires, they are made the sizes for a reason!

Fred/N0AZZ

For a 4 1/2" lift at the least a 33x12:50x15 on a 15x 8" wheel with 3 3/4" of BS to 4" max.

Here is my 33x12:50 with a 4 1/2" lift but also have a set of 35"s for it also.

bender32

33s will work if u have cut fenders....

98XJ40K

Yep. 33's with about 4". These are the GY MTR Kevlar and actually measure 33". Most 33's will be closer to 31" when you measure them.

andrewmp6

Or look at http://www.myjeepxj.com/cherokee-lift-kits

Fred/N0AZZ

Yes you really need to find out the real size of any tire "Before" you buy it as the do false advertise on a lot of them, mine are a true 33" tire. Its a rip-off to lose the extra clearance when they charge you for it.

unidentifiedbomb

AAL rear? The front looks about 4 but not the rear.
Also, I'm on 4" with 31s and don't rub anywhere. Looking to go 33s when I cut my fenders and put bigger flares on. This is my rear end with a 33 and a 31 up front on stock flares.