77olds

I'm gonna order a set of Treadwright Guard Dogs, smallest size they come in is 31/10:50/15.

I'm running 30/9.50/15 BFG A/T's right now, get 0 rub (I also don't flex it out.. not yet at least) and Jegs D Windows with 3.75" backspacing.

So, for those with this same set up, do you get an rub in normal driving conditions at all?

CheapCherokee

i rub the lower control arm when turning left (not right for some reason) and other than that no rubbing. with your backspacing you should not have that issue.

cmack

I had to trim my bumper because I was rubbing on it on turns up small inclines sometimes (no swaybars). For the sake of wheeling, I wanted to anyways.

77olds

Sounds like at worst i'd just have to trim my bumper end caps?

hbracing13

With my gf I did zj v8coils and a another xj main leaf and mj shackles, so it maybe pushing 3 and all I did was just trim the front and cut and fold the rear and no problems even when flexed but sways are both still on d window rims with about 4 backspace

cmack

More or less. End caps and the bottom plastic part of the bumper is what I did. My rear fenders still rub on flex, so I'll cut and fold eventually. Here's what my front looks like though trimmed...

HCFjeep

I'm running 3" lift with guard dogs and rub at flex need to cut an fold rear and trim front.

88_cherokee

i have a 3'' lift with silverstone 31's 10.5 and only rub turning 1 way. thats it. no issues at all

speedballin

Look and see the actual height and width of your tire you want compared to the others not many are true 31s ,
But on my 3in series 2 from rough country I had no rub with Mickey mtzs and d windows they were also getting bald and when new I think only measured like 30.6 or something in height

Hope it sorta helped

zjjerk

I'm on the re super ride kit which settled more towards 3.75 and i rub when full lock left on my inner flare. 31x10.50's on 4 inch bs d windows. It'd only take 5 minutes with a cutting wheel to make them not rub at all.

Bbasso

BDS 3 inch 31X10.5-15, no issues at all.

xpedition xj-eh!

Exact same here. I should adjust the limiter screw on the knuckle to eliminate the control arm rub during left turns.

77olds

Alright. I'm convinced. I just placed the order for some 31x10.50x15 TreadWright Guard Dogs

Should be here in 4 to 6 weeks.

96XJ2Door

On my 96 I currently am running a 2" spacer up front and extra leafs in the rear. (Got it with 6 leaf packs). Running 31 x 10.50s with no issues.

Accumulating parts for a 6.5" lift.