Sye install thread?
#1
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Northern Michigan
Posts: 365
Likes: 0
Received 1 Like
on
1 Post
Year: 2000 XJ
Model: Cherokee
Engine: 4.8L Stroker
Sye install thread?
I was curious if anyone knew of a thread that had a good detailed install of a SYE. the directions that came with it are pretty terrible.
#2
Cherokee Forum Vendor
Join Date: Mar 2011
Location: Lynden, WA
Posts: 1,448
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
This is one of my favorite NP231 SYE install threads. I believe you do have to be a member to see the pictures though... Sign up instantly activates your account.
http://www.off-camber.com/forum/topi...e-on-a-np-231/
Kris Froehlich
http://www.off-camber.com/forum/topi...e-on-a-np-231/
Kris Froehlich
#4
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
There is a video on YouTube made by I thin advanced adaptors, it shows every step in detail. I'll try to find a link.
I know you wanted a thread but this vid is so in deph I think it'd help more.
I know you wanted a thread but this vid is so in deph I think it'd help more.
Last edited by bhennessee1; 01-13-2013 at 07:01 PM.
#6
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Northern Michigan
Posts: 365
Likes: 0
Received 1 Like
on
1 Post
Year: 2000 XJ
Model: Cherokee
Engine: 4.8L Stroker
Thanks a lot guys. I am using a Tom woods ds. I will use the thread and video. Hopefully it all goes smooth. What do you guys shim your axles with to point them up? This is my first one?
#7
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
Degree shims, you can find them at your local 4x4 shop, or just google them, make sure you get steel ones. You'll need 2.5 inch wide by about 4 or 6 degrees.
Trending Topics
#9
CF Veteran
Join Date: Apr 2011
Location: Chickamauga Ga.
Posts: 3,493
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0
http://www.4wheelparts.com/Lift-Kits...02&t_pl=103562
#10
Seasoned Member
Thread Starter
Join Date: Mar 2012
Location: Northern Michigan
Posts: 365
Likes: 0
Received 1 Like
on
1 Post
Year: 2000 XJ
Model: Cherokee
Engine: 4.8L Stroker
Ok. I have 4.5 in the front and 6" in the rear. It has sagged enough that it is nearly level with the front now. I'll look into those shims. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
shelby5041
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
39
11-07-2015 01:22 AM
Dannymac1216
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
13
09-08-2015 06:28 AM
RickJames Bish
Modified XJ Cherokee Tech
5
09-02-2015 03:22 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)