Suggestions for sourcing a V8 engine
Howdy Y'all,
Bought a thoroughly beaten to death XJ a few years ago and the motor has such bad blow-by that I can't stand to drive it with the windows down. Stink from the motor is horrendous. I've been wanting to install a used V8 from a donor car/truck such as a GM 5.3L or Magnum 5.2L but all the stuff I can find on ebay or junk yards seems suspect at best. Anyone have a suggestion for obtaining a donor motor? I really don't want to buy the whole wrecked car just to ensure I know what I'm getting. thanks David 1992 XJ, 4" lift, 33" tires, AX15 South Central Missouri |
Originally Posted by Black92Cherokee
(Post 3542243)
Howdy Y'all,
Bought a thoroughly beaten to death XJ a few years ago and the motor has such bad blow-by that I can't stand to drive it with the windows down. Stink from the motor is horrendous. I've been wanting to install a used V8 from a donor car/truck such as a GM 5.3L or Magnum 5.2L but all the stuff I can find on ebay or junk yards seems suspect at best. Anyone have a suggestion for obtaining a donor motor? I really don't want to buy the whole wrecked car just to ensure I know what I'm getting. thanks David 1992 XJ, 4" lift, 33" tires, AX15 South Central Missouri |
Around here, it's cheaper to buy a complete truck and scrap what you don't want than to get an engine/trans combo
And it's 'chocked' not chalked....lol |
Originally Posted by TRCM
(Post 3542265)
Around here, it's cheaper to buy a complete truck and scrap what you don't want than to get an engine/trans combo
And it's 'chocked' not chalked....lol |
We'll chalk it up to auto-correct......LOL
|
I’ll take it ! Haha
|
That is right. A used vehicle with a bad interior is cheaper than an engine out of a wrecking yard. Plus, you want it loaded with power accessories and cats. Here I can take a rig minus the motor to the crusher for free
|
Originally Posted by GreaseMonkey17
(Post 3542252)
Car-part.com will let you source every salvage yard in the country’s inventory ! Also Craigslist is always chalked full of LS engines for swaps !
http://www.lingenfelter.com/forum_li...C-mile-numbers |
Originally Posted by Turbo X_J
(Post 3542285)
After the OP finds a donor they should contact Lingenfelter for a kit:
http://www.lingenfelter.com/forum_li...C-mile-numbers |
Originally Posted by TRCM
(Post 3542265)
Around here, it's cheaper to buy a complete truck and scrap what you don't want than to get an engine/trans combo
And it's 'chocked' not chalked....lol Though, something like a 5.3 with complete drivetrain can be found for relatively cheap around here. Now, if you're looking at something in the 6.0L range (LQ4 or LQ9), then buying a complete vehicle is more likely. Though, I've seen low mileage engines going for ~$1500 to $2k between car-part, ebay, local, etc. Right now I know of someone local to me selling two slightly higher mileage LQ4's for $1k, and one low mileage LQ9 for $1450. Though, he seemed open to some offers. I know someone who got lucky, and after parting out the vehicle it came from, ended up with a free low mile LQ9 AND money in his pocket. But that's EXTREMELY unlikely to happen for most. |
All times are GMT -5. The time now is 11:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands