Stock Height Aftermarket Control Arms
#1
Banned
Thread Starter
Join Date: Jul 2014
Location: Las Vegas
Posts: 820
Likes: 0
Received 1 Like
on
1 Post
Year: 1997
Model: Cherokee
Engine: 4.0
Stock Height Aftermarket Control Arms
Im looking to keep my Cherokee at basically a 1" lift but would like to add upgraded control arms that will have better flex. Does anyone know who makes a stock setup aftermarket control arm?
#2
Beach Bum
Most control arms, if they are adjustable, will start at stock lengths.
I have Rock Krawler arms.
http://www.rockkrawler.com/ProductDe...Code=RK00706XJ
http://www.rockkrawler.com/ProductDe...Code=RK00123XJ
I have Rock Krawler arms.
http://www.rockkrawler.com/ProductDe...Code=RK00706XJ
http://www.rockkrawler.com/ProductDe...Code=RK00123XJ
#5
Senior Member
Join Date: Oct 2011
Location: St. Albert
Posts: 731
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0L I6
My stock bushings were way worn out when they were replaced, so better for me. Aftermarket arms won't make an ounce of difference in terms of ride quality on a 1" lift if your bushings are in good shape.
Edit: I just actually read the original post, my RE superflex arms feel tight and work very well, though with the metal-metal joint at one end I would imagine small bumps and road imperfections would be a little more noticeable.
Edit: I just actually read the original post, my RE superflex arms feel tight and work very well, though with the metal-metal joint at one end I would imagine small bumps and road imperfections would be a little more noticeable.
Last edited by EvstaG; 08-15-2014 at 04:42 PM.
Thread
Thread Starter
Forum
Replies
Last Post
2000JGC
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
1
09-03-2015 09:53 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)