stinger front bumper install
#1
Newbie
Thread Starter
Join Date: Oct 2013
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
stinger front bumper install
I just purchased a stinger front bumper and have yet to install it, i am asking for suggestions or ideas on the best way to get the existing bumper off.
I am replacing the front and rear bumpers. ive been told pb blaster and wd40 for a few weeks before im ready to install. i bought a breaker bar and am going to assume that i will probably end up snapping a few bolts since they were pretty well rusted when i looked up under there. Does anyone know the type of oem bolts that are on 99 xj that hold the bumpers on. i want to order some more bolts before i started the project just incase i snap a couple.
suggestions, ideas, pictures if you have a stinger front bumper too.
thanks
kyle
I am replacing the front and rear bumpers. ive been told pb blaster and wd40 for a few weeks before im ready to install. i bought a breaker bar and am going to assume that i will probably end up snapping a few bolts since they were pretty well rusted when i looked up under there. Does anyone know the type of oem bolts that are on 99 xj that hold the bumpers on. i want to order some more bolts before i started the project just incase i snap a couple.
suggestions, ideas, pictures if you have a stinger front bumper too.
thanks
kyle
#2
CF Veteran
Join Date: Jan 2013
Location: west chester, pa
Posts: 19,216
Likes: 0
Received 39 Likes
on
35 Posts
Year: 1999
Engine: 4.0
My bumper that I made, sorry it isn't a stinger lol.
The oem bolts are 10 mm, I forgot what pitch.
I bought grade 10.9 mm bolts for two holes that had factory nuts welded on inside, and 4 1/2 inch bolts on other 4 holes and I made unibody tie ins along with few more bolts.
If u have a steering spacer (should get it if ur getting aftermarket bumpers) you would need three longer 7/16 bolts
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)