Xj88

The picture is what the wiring was in the back if my old stereo..the new stereo I have has the same wires but not the same clip to insert them..do I just cut and splice into the harness that came with the new unit

kyledye25

They make a harness that will plug into your jeep and have the wiring there for you to splice into the new head unit with out cutting up your stock wiring. You can buy it at best buy and probably many other places. I buy everything from crutchfied.com. I wouldn't recommend cutting up your stock wiring. At least head to the closest audio store or electronics store and pic up the harness I mentioned. It will have all the same or close to the same colors as your new head units wiring. Makes life easier.

The91XJ

I can't tell for sure, but it looks like someone hacked out your stock stereo harness and used male/female clips. If you could snap a few more pics of the wiring i could tell you 100% what to do..

cdawall

looks like someone dyked off the stock connector and installed the one that came with their aftermarket head unit. you will need to cut theirs off and install yours.

89XJDan

Tried doing this today. Didn't go well. My suggestion is that you be smarter then me. Cut and connect each wire one at a time.

I gave up and am going to the junk yard to hack the stock connector off of another Jeep so I can just buy the adapter.

94XjSport94

I cut and soldered my new radio wires into it no problems at all

Xj88

I def have aftermarket wiring...im thinking of pulling one wire at a time and wiring it into the new harness

Xj88

Also from what the new unit says it has all the exact same wires that are already coming from the dash..Im thinking its just a process of pulling them one at a time from existing harness and wiring them into the new one and put a little electric tape over them. Ive looked everywhere for a new harness...no luck.

Xj88

Got stereo wired and mounted...sounds great..new speakers next.