steering box spacer info
01-25-2012, 05:35 PM
#1
Newbie
Thread Starter
Join Date: May 2011
Location: Pennsylvania
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: Straight 6
steering box spacer info
Okay guys im looking to fab my own steering box spacer like c rok has made.....lm trying to find the spacing required heres a picture of the piece i have left
01-26-2012, 10:09 AM
#3
Senior Member
Join Date: Feb 2009
Location: chico,ca
Posts: 553
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Cherokee
Engine: 4.0
all you have to do is measure it !! then make your new one just as thick or if you go to a durango box you have to make it a little thicker when i made mine i used 3/16" plate and 1" 1/4 wall dom for the spacers 
12-21-2012, 01:25 AM
#4
Newbie
Join Date: Feb 2012
Location: Indiana
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee
Engine: 4.0
Originally Posted by nismo5
all you have to do is measure it !! then make your new one just as thick or if you go to a durango box you have to make it a little thicker when i made mine i used 3/16" plate and 1" 1/4 wall dom for the spacers
12-21-2012, 02:02 PM
#5
Senior Member
Join Date: Jan 2011
Location: Dalton, MA
Posts: 645
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0 H.O. 180K miles
Just throw the stock one on a piece of steel and mark the holes. I made one by welding a stack of the correct size washers onto a sheet of 1/4 steel.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)