Steering box problems
#1
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Steering box problems
So I just noticed today that when j turn the wheel the whole section of unibody rail moves left to right about 1/4". It's also a little cracked right behind the swaybar bracket. I'm on 4.5" of lift and 31's with stock steering. I've got a zj tie rod and durango steering box to swap in but I don't want to untill I solve this issue. Any suggestions? I also have an IRO track bar if that matters
#3
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by katowkalin
JKS makes a steering box repair kit that gets welded on. have done 2 myself and worked great
Trending Topics
#9
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
I really like the JKS kit but will that reinforce it enough? I can grind out the small crack and weld it but I want a good reinforcement kit so this doesn't happen again when I go to 35's
#10
thanks captain obvious.
crok doesnt make a repair kit. his kit is to help not create what BNJ has going on.
yes its enough. one rig is on 37's and hasnt had an issue since
yes its enough. one rig is on 37's and hasnt had an issue since
#11
CF Veteran
Thread Starter
Join Date: Jul 2011
Location: Warren, Pa
Posts: 2,164
Likes: 0
Received 1 Like
on
1 Post
Year: 97
Model: Cherokee
Engine: 4.0L
Originally Posted by katowkalin
thanks captain obvious.
crok doesnt make a repair kit. his kit is to help not create what BNJ has going on.
yes its enough. one rig is on 37's and hasnt had an issue since