Slip Yolk Eliminator Install From Parts Transfer Case
12-26-2013, 09:39 AM
#1
CF Veteran
Thread Starter
Join Date: Sep 2013
Location: California
Posts: 1,552
Likes: 0
Received 7 Likes
on
7 Posts
Year: 91
Model: Cherokee
Engine: 4.0
Slip Yolk Eliminator Install From Parts Transfer Case
So I did something wrong when I did the SYE install. I swapped the fork and entire SYE shaft with gears from parts t case. Both NP 231s. Fights to get in 4 low and pops out every chance it gets But goes down the road with zero noise. In 4 Hi anything above 20 mph sounds like somebody is banging on it with a hammer. In 2 wheel drive it drives fine with no noise. Not running the front drive shaft. Going to take it apart on Friday to investigate. Do you guys have any ideas of where I went wrong?
12-30-2013, 11:37 PM
#4
CF Veteran
Thread Starter
Join Date: Sep 2013
Location: California
Posts: 1,552
Likes: 0
Received 7 Likes
on
7 Posts
Year: 91
Model: Cherokee
Engine: 4.0
So... My stupid *** got in a hurry. Put the synchronize sleeve on backwards. Put it back in its correct position. Everything is up to par now.
12-30-2013, 11:40 PM
#5
CF Veteran
Thread Starter
Join Date: Sep 2013
Location: California
Posts: 1,552
Likes: 0
Received 7 Likes
on
7 Posts
Year: 91
Model: Cherokee
Engine: 4.0
Just noticed you're a Boxer dog man. Go hit up this thread. https://www.cherokeeforum.com/f59/pi...185449/index3/ Love the Boxer dogs.
Thread
Thread Starter
Forum
Replies
Last Post
SixShooterXJCherokee
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
9
08-30-2015 08:06 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)