Dana 35 axle bearings.
#1
Seasoned Member
Thread Starter
Dana 35 axle bearings.
Getting ready to replace the axle bearings and seals on my 01 xj with Dana 35. Pinion bearing seems fine at the moment.
Any tips tricks welcome. Do I need anything other than the bearings, seals, and gear oil?
Any tips tricks welcome. Do I need anything other than the bearings, seals, and gear oil?
#2
CF Veteran
You will need to pull the bearing out of the axle housing. A slide hammer with a hook or two is real handy
#3
Senior Member
And you need a way to press/wack the new bearing into the housing by hitting nicely on the outer race. Lacking the correct bearing driver a big socket, piece of pipe or the old bearing can work. The bearing needs to go in straight.
Same deal with the seal .
And you need the magic additive if it's a Trac loc diff.
Same deal with the seal .
And you need the magic additive if it's a Trac loc diff.
Last edited by exasemech; 08-02-2022 at 06:02 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Atomicpunk001
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
02-03-2019 05:18 PM
Oswalla
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
10-29-2017 12:12 PM
1996bluexj
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
08-09-2017 08:49 AM
mopwrd340
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-24-2012 10:31 PM
BBPeik
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
03-16-2010 09:15 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)