Rear license plate relocation.
#1
CF Veteran
Thread Starter
Rear license plate relocation.
Need to relocate the rear plate with the light. Anyone have any recommendations? I'm looking for a plastic piece with a light that will go over the whole license plate, kind of like the factory mount. I saw one one time, somewhere.
#3
Senior Member
Join Date: May 2010
Location: Johnson County, Kansas
Posts: 701
Likes: 0
Received 1 Like
on
1 Post
Year: 1995
Model: Cherokee
Engine: 4.0 HO
Bought one at Oreillys for around $3.50. I cut a plug off one at the j/y so I could just plug it into my stock plug without cutting my factory wiring.
#4
CF Veteran
Thread Starter
How is the plate held on with that? I found the light deal on quadratec.
I was looking for something a little wider like this:
http://www.rockcrawler.com/features/..._xj_bumper.asp
I was looking for something a little wider like this:
http://www.rockcrawler.com/features/..._xj_bumper.asp
#5
CF Veteran
Thread Starter
#6
CF Veteran
Join Date: Feb 2011
Location: Apple Valley, MN
Posts: 2,763
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee (XJ)
Engine: 4.0L
#7
Senior Member
Join Date: Dec 2008
Location: Aldergrove,BC,Canada
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Wagoneer
Engine: 4.0L I6
How is the plate held on with that? I found the light deal on quadratec.
I was looking for something a little wider like this:
http://www.rockcrawler.com/features/..._xj_bumper.asp
I was looking for something a little wider like this:
http://www.rockcrawler.com/features/..._xj_bumper.asp
thats just a google picture
cant say 100% but if i recall correctly its just some inserts into the hatch and screwed into those, its been a while since i looked as ive realized it will be a while till i get around to my rear swing arm build
my hatch skin is off so ill take a look, i think there might even be a plug in the factory harness in that area even though i didnt have a rear swing arm....thats the nice thing bout jeeps is even if your factory configuration didnt come with the part theres likely a plug for it
Last edited by mud-dog27; 01-05-2012 at 08:57 PM.
Trending Topics
#8
CF Veteran
Thread Starter
I found a pretty decent plastic holder + light on quadratec, you bolt the holder to the car and the plate to the holder.
#10
CF Veteran
Thread Starter
#11
CF Veteran
Join Date: Nov 2011
Location: Las Vegas, NV - St. George, UT
Posts: 1,314
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0
You can get them cheaper from the auto parts store. Check the trailer section. I used one on my old XJ and mounted the plate to the bumper (custom 4x4 bumper with tire carier) with "security style" self tappers (allen head with the button in the middle, picked up at Fastenal).
Or... Orielly has the license plate frame with a light on it. I think it was $25. My friend has it on his truck because he has roll pan. Looks clean too. Mounts just like a plate frame and has the plate light. There is also a brake light wired to it that flashes if you have the need for one.
Or... Orielly has the license plate frame with a light on it. I think it was $25. My friend has it on his truck because he has roll pan. Looks clean too. Mounts just like a plate frame and has the plate light. There is also a brake light wired to it that flashes if you have the need for one.