huntingman2706217

Pic shows my problem... Its rubbing AND i have the skid so i cant bolt it on in those two holes... What is this and can i take it off without oil pissing everywhere?


Plus the frame side of the skid is nowhere near the OEM holes for the oem skid? Anyone else had this issue?

mr white

What the hell is that hitting? I don't recall any pieces that look like that under mine. Lol.

94XjSport94

It's on the t case. I've never seen one hit like that.

huntingman2706217

Im gonna look on my XJ tomorrow... See whats there lol... I dont get why its all up on mine either... Enless its the difference between a ax15 and aw4 crossmember? Mine sits down in more or something... Last thing i wann do is raise it up though lol

mr white

possibly shot tranny mount. They do sag quite a bit when they are old.

94XjSport94

There is a difference in the Ax15 and AW4 members. The AX15's are supposedly a .75" drop.

unidentifiedbomb

The simplest thing would be to just grind off the part on the skid

andrewmp6

Yeah if the trans mount is old replace it,If its still a proud grind that spot down tell you have clearance.

huntingman2706217

Mounts new... If i cut that away then theres nowhere to mount the skid... And is have to cut it up also... Rather not...

huntingman2706217

Id rather just like to know if thats gonna **** fluid everywhere lol

rctrav

Did you but your RC long arms used? Because on mine the tranny bolts don't hang below the cross member like yours does.

huntingman2706217

yes... what do you mean? the 4 mount bolts? they may have redesigned it... if i was to keep it i would make a 1/4 plate to weld to the bottom around the nuts with larger holes so a socket can still get on them but they wont sheer off on a rock... ill be selling everything come march/april anyways...

jmm0122_

Theres only one way to find out. I would suggest you go slow haha.

OverlandZJ

That's the cap for the poppet ball and spring assembly..

Does RC offer different crossmembers dependant on trans?

PocketsEmpty

Try contacting RC support perhaps? Maybe you have an AW4 crossmember?