raising the tc ?
anyone ever raise the tc ? say a 1/2" or so w/ a spacer between the tc & mount plate. reason being a friend bought a used skid built for the 231, he has a 242 tc which hangs a bit lower. jeep has a sye so not concerned w/ vibes, other option is to cut a rectangle hole to clear the 242 then weld in a little bubble. lose some clearance that way . opinions ? thx
|
IRO makes a clocking jig to clock the TC up higher. Or, I believe there is an adapter ring of sorts.
|
Originally Posted by srb53150
(Post 3114291)
anyone ever raise the tc ? say a 1/2" or so w/ a spacer between the tc & mount plate. reason being a friend bought a used skid built for the 231, he has a 242 tc which hangs a bit lower. jeep has a sye so not concerned w/ vibes, other option is to cut a rectangle hole to clear the 242 then weld in a little bubble. lose some clearance that way . opinions ? thx
|
Originally Posted by Metmknice
(Post 3114297)
IRO makes a clocking jig to clock the TC up higher. Or, I believe there is an adapter ring of sorts.
X2 |
thx but
Originally Posted by Fred/N0AZZ
(Post 3114639)
X2
|
All times are GMT -5. The time now is 12:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands