installed lift, did i miss something
#1
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Tunkhannock PA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4L
installed lift, did i miss something
when i did the front i just disconnected the shock and sway bar links. i didnt loosen anything else. should i have? i used a spring compressor to get the new coils in. but im wondering if i should have loosend the track bar or control arms and retighten afterwards? would it make a difference?
#2
when i did the front i just disconnected the shock and sway bar links. i didnt loosen anything else. should i have? i used a spring compressor to get the new coils in. but im wondering if i should have loosend the track bar or control arms and retighten afterwards? would it make a difference?
#4
Senior Member
Join Date: Dec 2008
Location: Aldergrove,BC,Canada
Posts: 564
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1989
Model: Wagoneer
Engine: 4.0L I6
#5
Seasoned Member
Thread Starter
Join Date: Aug 2011
Location: Tunkhannock PA
Posts: 349
Likes: 0
Received 0 Likes
on
0 Posts
Year: 99
Model: Cherokee
Engine: 4L
Vibes and a little clunk grind noise after i let off gas.im doing a 1" tc drop and now i guess im buying a trac bar....
Last edited by bnkk; 12-30-2011 at 12:08 AM.
#7
CF Veteran
the clunk and grind sound could just be the u-joints in the rear drive shaft. they're not used to spinning at that angle.
i'd do a t-case drop and/or 4 degree shims in the rear axle/leaf perches. (get steel, not aluminum).
i'd do a t-case drop and/or 4 degree shims in the rear axle/leaf perches. (get steel, not aluminum).
Thread
Thread Starter
Forum
Replies
Last Post
Blackcherokee290
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
27
07-26-2022 07:52 PM
clark40
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
1
08-28-2015 07:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)