chrisquested

So right now my 97 cherokee is about to get alot of upgrades/ make over.

It is currently sitting on 31/10.50/R15 bfg km2s, rough country 3 inch lift, spectre air filter, and 2.5" exhaust with a cherry bomb.


My manifold is cracked and sounds like crap. so i wanted to buy a header for it just dont know which one to go with right now...Been searching ebay.

Next i want to add a bored out tb from thexjfiles.

Then 703 injectors from programbo.

Is this pretty much all the upgrades that i can do (cheaply)

chrisquested

this is what manifold i am thinking of getting

http://www.1aauto.com/1A/ExhaustMani...EM00147/255376

toddhalbot

this is gonna sound like a dumb question, but what is the difference between headers and the manifold?

Metmknice

That is just a replacement manifold and not a header, but will work fine.
I recommend a bored TB from strokedjeep.com
A 99+ intake would help as well.

chrisquested

More air flow which mean more hp is what i was told.


I was gona buy a header for my jeep only cause my stock manifold is cracked. But a guy told me to buy this one because "Many XJ owners will tell you that a more practical exhaust manifold replacement with built in "flex" points that account for thermal expansion and contraction (reason why the oem and many solid tube headers crack to begin with.)"

So that is why i am asking about this. as for performance i but a bored tb from this guy on here his name is thexjfiles its a 60mm bored tb.

crbnfibr

more air at one component will not show gain, you must go I/H/E to see real gain

chrisquested

So my cold air intake, bored tb, 2.5" exhaust, and 703 injectors should be good?

crbnfibr

i dont know if were allowed to talk about clean cats or straight pipes on here, but yeah i would expect to see decent improvement. esp since your getting rid of a cracked manifold, run smoother and all, dont forget to reset ecu, it needs to learn its new way of breathing.

chrisquested

Well I don't want to clean my cat cause I just bought a brandnew one when I did the exhaust. How do I reset ecu touch cables together?

cf1k1

https://www.cherokeeforum.com/f2/jee...ocedure-46047/

chrisquested

Ok sweet thanks....Now i need to find some motor mounts not sure which to buy or where to get them from....i know they make better than autozone ones some where.

cf1k1

These: http://browndogindustries.com/cherok...-2000-40l.aspx

Hear nothing but excellence about them!