Overhead console transplant
#1
Member
Thread Starter
Join Date: Aug 2011
Location: Quincy
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
Overhead console transplant
I am in the process of stripping some parts from my buddy's recently retired zj and the overhead console s one of the pieces. The zj is a 97 the Xj is a 96 I know I have to do some wiring to make it work but what components do I need from the zj to make most of it work. I have the console and the temp sensor, am I missing anything? And has any body done this/ have any diagrams or info on making it work?
#2
Senior Member
Join Date: Dec 2010
Location: Wekiva, FL
Posts: 888
Likes: 0
Received 2 Likes
on
2 Posts
Year: 99 sport
Model: Cherokee
Engine: 4.0 i6
I can tell you that it is almost impossible to make work. I f your really good with wiring you can make it read the direction only. Temp and everything else wont work. Then there is the issue of installing it on the ceiling. It mounts complete different than the xj OHC.
If you still want to give it a try u need the wiring harness that goes down the passenger a pillar to add to your list.
There are some extensive threads on NAXJA.com about the subject. Someone on there got it work mostly.
good luck, but honestly I think its not worth the effort. Your best best is to find one at the JY. I know, it took me six months to find one and I almost had to lay down a beating as someone was trying to pull it from my wheel barrel.
Here are some pics of ine
If you still want to give it a try u need the wiring harness that goes down the passenger a pillar to add to your list.
There are some extensive threads on NAXJA.com about the subject. Someone on there got it work mostly.
good luck, but honestly I think its not worth the effort. Your best best is to find one at the JY. I know, it took me six months to find one and I almost had to lay down a beating as someone was trying to pull it from my wheel barrel.
Here are some pics of ine
#5
Senior Member
Join Date: Dec 2010
Location: Wekiva, FL
Posts: 888
Likes: 0
Received 2 Likes
on
2 Posts
Year: 99 sport
Model: Cherokee
Engine: 4.0 i6
just go to your local fabric store, get looked at funny for being the only guy in there and head straight to the camo section. 3 1/2 yards will be plenty.
Last edited by XJUSMC; 01-27-2012 at 05:02 AM.
#7
Member
Thread Starter
Join Date: Aug 2011
Location: Quincy
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1996
Model: Cherokee
Engine: 4.0L HO
While we are on the subject did you re use the original insulation put new fabric over it or did you make the headliner all from scratch?
Trending Topics
#8
Senior Member
Join Date: Dec 2010
Location: Wekiva, FL
Posts: 888
Likes: 0
Received 2 Likes
on
2 Posts
Year: 99 sport
Model: Cherokee
Engine: 4.0 i6
I just took the old headliner off brushed it all off with a broom and glued the new fabric on when u glue just go from the middle to the out side edge and use the spray glue on the back of the fabric and the headliner
The worst part is taking down all the trim I also went ahead and isulated the roof with some r4 I had in the garage
The worst part is taking down all the trim I also went ahead and isulated the roof with some r4 I had in the garage
#9
Member
Join Date: Mar 2009
Location: Punta Cana , Dominican Republic.
Posts: 249
Likes: 0
Received 1 Like
on
1 Post
Year: 1988
Model: Cherokee
Engine: 4d56td
you can get the lights the temp , and the direction to work , i already did it on my 88 xj , used some leds and it works great , there is a diagram i got so i could check where goes each wire....
#10
Member
Join Date: Jan 2011
Location: St. Louis, MO
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1992
Model: Cherokee
Engine: 4.0
What LEDs did you use? I was wanting to put some in mine but I was looking for something that was more directional instead of the usual ones with the LEDs around the perimeter.
#11
oh console
i put a 96 xj console in my 1992 sport. i got the console assembly the wire harness temp sensor and the mounting brackets from one vehicle. When i went to install the wiring I found several inconsistencies between the 92 and 96 the harness had the same plugs but different wire to pin locations. I cobbled both the stock dome light harness and the other harness together using several wiring diagrams. If I can find my notes that I made I will scan them and post or send them to you. Best advice is tackle one function at a timerecovering if needed, fitment and mounting, Lights, temp and compass