new np231
#1
CF Veteran
Thread Starter
Join Date: Sep 2011
Location: vernal, utah
Posts: 1,354
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1995
Model: Cherokee
Engine: 4.0
new np231
i found an np231 with a sye on it out of a 94 yj. it's a 23 spline. will it work on my 95 cherokee with aw4? or is the input shafter a different length?
#2
CF Veteran
Join Date: May 2009
Location: Glen Burnie, MD
Posts: 1,844
Likes: 0
Received 3 Likes
on
3 Posts
Year: 1994
Model: Cherokee
Engine: 4.0 H.O. K&N, Borla headers, custom down pipe, magnaflow hi-flo cat, flowmaster to turn down tip
it will work with your cherokee, but you will need at least a 1" t-case drop, due to the fact that the t-case on the wrangler YJ is cocked a few degrees closer to the body, which will hit the under side of your jeep unless you drop your transfer case. but it will work fine. i had one on my 88 cherokee, no problems. also i think you might have to remove one of the mounting bolts, maybe
#3
CF Veteran
Join Date: Feb 2010
Location: Soddy Daisy TN
Posts: 5,420
Likes: 0
Received 0 Likes
on
0 Posts
Year: 97
Model: Cherokee
Engine: 4.0L
Never heard of dropping one, I put one in my old ZJ out of a TJ. What you'll need to measure is the input length. Jeep used 3 lengths in the 23 spline versions. They are fairly easy to swap if it's the wrong length.
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
10-22-2023 04:16 AM
Capxxiv
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
2
09-22-2015 03:52 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)