Need Winch wisdom. M8000 vs 9500UT. Lifetime winch
#1
Newbie
Thread Starter
Join Date: Oct 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Need Winch wisdom. M8000 vs 9500UT. Lifetime winch
I started looking into winches, and I'm at a bit of a mental stalemate. I have two options available to me right now. I want to buy a winch that I can service and keep going until I don't want it anymore.
$525 shipped
Ramsey 9500UT
Synthetic Viking Cable
Aluminum Hawse Fairlead
Winch Plate
2 standard controllers, wireless controller but missing remote
or
$390 shipped
Warn M8000
Synthetic Master-Pull Cable
Roller Fairlead
1 standard controller
has a bad solenoid (these seem to be about $20)
Is one a much better deal than the other? Tearing down the Warn is not a problem.
Due to space constraints, the M8000 would fit better with the solenoid box relocated, but I'm sure the Ramsey would fit too.
$525 shipped
Ramsey 9500UT
Synthetic Viking Cable
Aluminum Hawse Fairlead
Winch Plate
2 standard controllers, wireless controller but missing remote
or
$390 shipped
Warn M8000
Synthetic Master-Pull Cable
Roller Fairlead
1 standard controller
has a bad solenoid (these seem to be about $20)
Is one a much better deal than the other? Tearing down the Warn is not a problem.
Due to space constraints, the M8000 would fit better with the solenoid box relocated, but I'm sure the Ramsey would fit too.
#2
Newbie
Thread Starter
Join Date: Oct 2012
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Ended up grabbing a local x8000i for $200, needed a solenoid and a controller. Got a heavy duty "ford" style solenoid for $20 and a DPDT momentary switch at radioshack for $6. Put it all together and now I have a winch!
The problem is, the integrated solenoid pack is reaaaaaaally tall, and it can't be relocated effectively. So in order to mount it where I want it, I have to rotate it onto its back. Not only that, but the plug for the remote is in the worst place imaginable for what I want to do. We shall see...
The problem is, the integrated solenoid pack is reaaaaaaally tall, and it can't be relocated effectively. So in order to mount it where I want it, I have to rotate it onto its back. Not only that, but the plug for the remote is in the worst place imaginable for what I want to do. We shall see...
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)