Need some help and feedback with lift - see pics
11-14-2013, 03:56 PM
#1
CF Veteran
Thread Starter
Join Date: May 2013
Location: Washington, MO
Posts: 1,056
Likes: 0
Received 1 Like
on
1 Post
Year: 2000
Model: Cherokee
Engine: 4.0
Need some help and feedback with lift - see pics
Had a lift installed... 2" Rusty's springs and 2" AAL.
I think they send me a 3" AAL. Tires are 235-75-15. It looks way high in the back.
before
after
Here is the angle... how does it look? I get some vibes during low speed. Also going 30mph when I left on and off the gas there is a loud "clunk!"
Here is what the front dif looks like too... lots of grease... not sure why?
I think they send me a 3" AAL. Tires are 235-75-15. It looks way high in the back.
before
after
Here is the angle... how does it look? I get some vibes during low speed. Also going 30mph when I left on and off the gas there is a loud "clunk!"
Here is what the front dif looks like too... lots of grease... not sure why?
11-14-2013, 04:27 PM
#2
11-14-2013, 04:49 PM
#4
Seasoned Member
Join Date: Apr 2012
Location: Pittsburgh, PA
Posts: 322
Likes: 0
Received 1 Like
on
1 Post
Year: 1998
Model: Cherokee
Engine: 4.0
Also, grease comes from the front shaft when it is compressed the entire way. If you disconnected the lower control arms durning the Install of the lift then the axle could have rolled a certain way enough that the shaft extended or compressed and pushed the grease out. Nothing to worry about
Thread
Thread Starter
Forum
Replies
Last Post
rdr8887
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
11
01-27-2020 09:24 AM
ARCH4NGEL_II
Modified XJ Cherokee Tech
0
09-07-2015 12:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
