my lower controls arm move!
#1
Junior Member
Thread Starter
Join Date: Feb 2012
Location: WATERLOO, IN
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
Year: 01
Model: Cherokee
Engine: 4.0
my lower controls arm move!
Hey guys, the foundation of my lift is a 4.5 x-flex lift from RC, I have noticed that the lower control arms shift forward and rearward despite how much I tighten them, I know that on a stock application there are shims that can be installed to manipulate caster, but I am not sure if those would work given my rigs alterations. My first thought was to weld in some heavy gauge washers on each side of the lca mount to isolate the movement, but I thought I would ask about other possible fixes before I go to such an extreme. Thanks
#6
The holes must be wallowed out. If you have adjustable arms i would probably just do away with the stock caster adjustment and weld some pieces of 3/16" steel with new holes drilled in them to the sides of the mounts.
#7
Seasoned Member
There is suppose to be a Caster Adjustment Bracket that holds the rear of your lower control arm in place, preventing it from moving fore and aft.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: LOWER control arms, FRONT skid and more for sale.
Gilfilan
Suspension/Steering
12
01-30-2016 07:53 PM
JPXJMOAB
Stock Grand Cherokee Tech. All ZJ/WJ/WK Non-modified/stock questions go here!
2
09-06-2015 07:16 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)