Cherokeewaterfowler

Can some people measure from the center of their hub to the bottom of their flare to give me some feedback on determining a lift size. I measure the back wheel and got 20.5". I was told that stock Cherokees are 17" in front 16" in back. Let me know your measurements with a 3" lift kit and or a 4.5" please.

XJwonders

I ll measure mine at lunch. I have 3 inch lift

XJwonders

It measures out to be 20 1/4 in front and 19 inch in rear for me. Running 3 inch on 235/75s. Hope that help u

Cherokeewaterfowler

Okay man thanks... also state what size tires you have... because I think that would play into the measurments too I guess... bigger tire more the measurement. But I assume you have a 3" and 31's... that's usually what most people do.... am I correct on that?

XJwonders

Read above

Lowrange2

I assume you're trying to figure out what size lift you have on your Jeep?

If that's the case, the measurements you're asking for has nothing to do with tire size.

Measure it like this:

http://www.naxja.org/forum/showthread.php?t=912893

Cherokeewaterfowler

Did you trim your fenders at all... and are you running 31 inch tires?

Cherokeewaterfowler

I got 20 1/4 in the front and back... ???

XJwonders

I already said I'm running 235/75/15. 31s were freebies that I run when I go mudding.

I didn't trim my fenders but I should because it was rubbing on it.

Cherokeewaterfowler

Sorry man... I don't know much about Jeep or Jeep components/vehicles yet. I always say by inches not the way you say it. I have a lot to learn.

Lowrange2

What are you trying to accomplish? Identify your lift?

Did you read what I posted?

Cherokeewaterfowler

Yes, I read it man. Thanks

Lowrange2

You aren't going to answer me, are you?

Cherokeewaterfowler

What are you talking about? I just answered you? Yes im trying to determine lift size and yes I read your link! I said Thank you.

Lowrange2

Not until this post had you answered me.

You're welcome.