Lower Sway Bar Link Mount Question
#1
Newbie
Thread Starter
Join Date: Mar 2015
Location: Arvada, CO
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
Lower Sway Bar Link Mount Question
Doing a lift on my son's 2000 XJ. Cannot get the darned lower mount bold out of the mount that is welded to the frame......see picture.
The question I have is.........Is that T55 bolt THREADED into that mount bracket or should it simply slide through it into the sleeved bushing on the other side? I soaked it in PB Blaster and already bent a T55 tool trying to twist the thing out. If it is just rusted in the hole, I will just keep pounding and may even try drilling that stupid thing out.
Any advice anyone has on what to try to get that stupid thing removed would be greatly appreciated!! I would REALLY love to get this project done today....UGH!
The question I have is.........Is that T55 bolt THREADED into that mount bracket or should it simply slide through it into the sleeved bushing on the other side? I soaked it in PB Blaster and already bent a T55 tool trying to twist the thing out. If it is just rusted in the hole, I will just keep pounding and may even try drilling that stupid thing out.
Any advice anyone has on what to try to get that stupid thing removed would be greatly appreciated!! I would REALLY love to get this project done today....UGH!
#3
Newbie
Thread Starter
Join Date: Mar 2015
Location: Arvada, CO
Posts: 20
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2000
Model: Cherokee
Engine: 4.0l
Thread
Thread Starter
Forum
Replies
Last Post
Choppersean
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
4
03-30-2016 11:26 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)