Metlic53

i tore up my lower axle mounts and am now getting around to fixing them. i figured i would go with ballistic fabrication mounts but which ones do i get? they have offset options and such and im unsure of which ones i should buy.
Here is the link http://www.ballisticfabrication.com/...ts_p_1397.html

If yall know of a better mount from somewhere else that would be appreciated. also, should i have a shop weld these on or could i do it myself or have a friend who is a welder do it? Thanks guys

xjmarc

Check some reviews of Ballistic and you'll see they have a bit of a reputation for jerking people around. Lots of other companies make them that are specific to your front axle unlike those. I run Rusty's and haven't had any issues with them. Just make sure you get some that are a decent thickness, 1/4" is good, and ones that are made for your axle so you have the least ammount of fab.

Lightfoot

I have had trouble with ballistic fab not getting my parts to me. Now cant get my money back from them.

I was getting new mounts like that for the rusted ones on my axle.

I was getting this kit from them http://www.ballisticfabrication.com/...it_p_1542.html.

There stuff is nice.

Thinking of getting this now http://www.ironrockoffroad.com/Merch...egory_Code=XDT.

You might be able to use this bracket but not sure http://www.ruffstuffspecialties.com/catalog/30ALB0.html

I had great service from Ruff stuff.

Hope that helps.

s14unimog

Not trying to point out the obvious but just fill in the blanks and select the ones you want.

Axle diameter: (measure it, I can't recall it)
mounting width: (measure the bushing width of your control arms)
degree offset: (you might not need any, you're placing it on the axle. That's more for true 4-link assemblies.)