Tcase Drop problems/questions
#1
Member
Thread Starter
Join Date: Jul 2011
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
Tcase Drop problems/questions
The last owner who installed the T-case drop on my cherokee didn't install a bracket for the green bushing that holds the little rod in place on the shift lever for 4wd. So the Tcase has dropped about two inches, along with the bracket. Do they make special brackets that I could buy or am I going to have to rig something up?
#4
CF Veteran
Join Date: Sep 2009
Location: West Valley
Posts: 3,612
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1998
Model: Cherokee (XJ)
Engine: 4.0
When I dropped my TC I just fabbed a bracket out of 1/8" stock to drop the linkage the 1" that the TC dropped. Pretty easy to do if you just look at it for a minute. A couple holes to mount your new bracket to the origional bracket at the top and mimic the existing bracket holes the distance of your drop on the bottom of your fabbed bracket, smooth as butta! Been running it for a year or better and works like a champ.
Are you sure yours is dropped 2", that seems excessive?
Are you sure yours is dropped 2", that seems excessive?
Last edited by Desert Rat; 11-11-2011 at 08:40 PM.
#5
Member
Thread Starter
Join Date: Jul 2011
Posts: 153
Likes: 0
Received 0 Likes
on
0 Posts
Model: Cherokee
When I dropped my TC I just fabbed a bracket out of 1/8" stock to drop the linkage the 1" that the TC dropped. Pretty easy to do if you just look at it for a minute. A couple holes to mount your new bracket to the origional bracket at the top and mimic the existing bracket holes the distance of your drop on the bottom of your fabbed bracket, smooth as butta! Been running it for a year or better and works like a champ.
Are you sure yours is dropped 2", that seems excessive?
Are you sure yours is dropped 2", that seems excessive?
Thanks for the idea, I may definitely try that.
#6
Seasoned Member
Join Date: Nov 2011
Location: Newark, OHIO
Posts: 266
Likes: 0
Received 0 Likes
on
0 Posts
Year: 1999
Model: Cherokee
Engine: 4.0L
When I dropped my TC I just fabbed a bracket out of 1/8" stock to drop the linkage the 1" that the TC dropped. Pretty easy to do if you just look at it for a minute. A couple holes to mount your new bracket to the origional bracket at the top and mimic the existing bracket holes the distance of your drop on the bottom of your fabbed bracket, smooth as butta! Been running it for a year or better and works like a champ.
Are you sure yours is dropped 2", that seems excessive?
Are you sure yours is dropped 2", that seems excessive?
Could you snap a picture of that?
Trending Topics
#8
Member
Join Date: Jun 2011
Location: Santa Rosa Beach, Fl
Posts: 172
Likes: 0
Received 0 Likes
on
0 Posts
Year: 2001
Model: Cherokee
Engine: 4.0
Thread
Thread Starter
Forum
Replies
Last Post
jpmarine6786
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
43
10-22-2023 04:16 AM
pmd1995
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
3
07-29-2017 07:58 AM
LittleRed94
Stock XJ Cherokee Tech. All XJ Non-modified/stock questions go here
5
10-06-2015 08:09 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)